105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Contech Engineered Solutions LLC

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Contech Engineered Solutions LLC, 8250 62nd Street N, PINELLAS PARK, FLORIDA 33781 on — Amputations, affecting the fingertip(s).

An employee was painting an 18-inch detention system manifold supported on a metal sawhorse. When the employee rolled the part from vertical to horizontal, the pipe side of the manifold slipped off his hand. His left ring finger was pinched between the pipe and the sawhorse and the fingertip was amputated.

Amputation Fingertip(s) Building materials, unspecified

Contech Engineered Solutions LLC

On February 12, 2025, an employee was performing maintenance on an extruded profile roller. The employee was caught in the powered roller assembly and suffered finger amputations on his left hand.

Contech Engineered Solutions, LLC

An employee had been stripping block outs from the form of a precast concrete double tee. Their left hand became caught between the concrete and the steel form, resulting in a severe laceration and crush injuries to their left index, middle, and ring fingers. This resulted in an amputation of the left index finger from the tip to the distal joint, the left ring finger from the tip to the fingernail, and the medical amputation of the middle finger to the distal joint.

Contech Engineered Solutions LLC

An employee was riveting two pipes together using a rivet machine when the rivet hammer activated and crushed the employee's left index finger. The injury resulted in an amputation.

Contech Engineered Solutions LLC

An employee dismounted a forklift to secure pipes in a row when a pipe rolled off a rack and hit his pelvic region, causing fractures to the right side of his pelvis.

Contech Engineered Solutions, LLC

A maintenance employee was aligning a belling head when the machine amputated the tip of his index finger.

View Contech Engineered Solutions LLC's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Thompson Pipe Group

An employee was anchored to a movable piece of equipment called a "lid" with a self-retracting lifeline harness. An overhead crane lifted the equipment, causing the employee to be pulled by his harness. The employee was pulled off the walkway and swung over the wall of the kiln. His body and head struck the wall. The employee lost consciousness and sustained a laceration to the side of his head that required stitches. The employee also sustained multiple fractured ribs and fractured vertebrae.

Forterra Pipe And Precast, LLC

An employee was using an overhead crane to lower a manhole cylinder to the ground to complete maintenance and cleaning. While removing a lifting hood from a manhole core (steel cylinder), the cylinder rolled and the employee's left little finger was caught between the crane hook and the lifting eye. The employee's little fingertip was amputated just below the nail.

Concrete Pipe & Precast, LLC

An employee was moving a 4x4 box jacket with an overhead crane. The employee hooked a chain to the jacket and put tension on it. It spun awkwardly, striking the employee and knocking him over. The employee fell on the same level and sustained a fractured rib and lacerations to his lower left abdomen and backside.

Forterra Concrete Products, Inc.

An employee was guiding a forklift operator who was placing a 48-inch form jacket (open cylinder) over a core (solid, stationary cylinder). The employee was positioned on the ground adjacent to the core. As the suspended jacket was positioned over the core, a gust of wind caused the jacket to move. The employee reached to steady it and the jacket moved downward pinching his left little finger between the jacket and the core and resulting in a fingertip amputation.

Universal Precast, Inc

An employee was at the bell packer when the scraper of the bell packer struck his hand. The employee sustained broken fingers and degloving injuries involving their right ring and little fingers.

DRIFTWOOD NURSERY & LANDSCAPING, INC

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

Hobby Lobby Stores, Inc.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

Sugar Cane Growers Cooperative of Florida

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

Air-flo/Erwood Heating & Air Conditioning

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.