Dedicated Fleet Services, LLC

An employee was cleaning off a pallet sorting machine. The employee jumped approximately two feet from the top of the pallet sorting machine to a lower platform. Upon landing, the employee's left ankle rolled, resulting in a fracture that required hospitalization.

An employee was working from the forth rung of an 8-foot step ladder installing radiator covers when the cover began to fall. The employee lost balance and jumped from the ladder, landing on his feet and sustaining a heel fracture.

An employee was standing on their flatbed truck adjusting a cargo pallet. He pulled one of the pallet boards and the board broke, causing the employee to lose his balance and jump 4 feet off the flatbed. The employee landed on a concrete surface and sustained a fractured left heel that required surgery.

An employee was cleaning a single screen machine that had been jammed by a garden hose. The employee exited the machine onto the belt guard and jumped from the belt guard to the ground three feet below. When he landed, he broke his left femur.

An employee was on a catwalk helping to lay down tubing when he lost his balance. The employee jumped approximately 42 inches to the ground and the 30-foot section of tubing struck his left shin resulting in a fracture that required surgery.

An employee was repairing the suspension of a semi-trailer. He was installing an air bag to the suspension when his left ring finger was crushed between the air bag and the suspension mounting beam. The employee was hospitalized.

An employee was refueling a pressure washer when it ignited and exploded. He suffered multiple third-degree burns to his chest and hands.

A mechanic had just finished a repair on a straight truck with a flatbed , which had been lifted using a bottle jack. As the employee was about to remove the jack, it failed. The truck shifted forward, dropped down, and struck the employee's chest. He suffered broken ribs and a broken shoulder.

An employee was performing diagnostic work on a vehicle engine. As the employee was leaning over the front of the vehicle, the engine was activated. A fuel leak had produced fumes around the engine, and the ignition spark ignited them. The employee suffered second-degree burns to both hands, both biceps, and the upper chest area.

An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.