Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Joseph T. Ryerson & Son, Inc., 5336 Hwy Avenue, JACKSONVILLE, FLORIDA 32254
on — Amputations, affecting the fingertip(s).
Final narrative
On June 29, 2021, an employee was unloading materials from a flat bed truck using an overhead crane and a nylon sling. While positioning the nylon sling to hoist a stack of 6"x12' aluminum round bars that was on top of 5"x12' rectangular flat bars, the round bars shifted, rolled back, and pinned the employee's left middle finger between a round bar and a flat bar, resulting in a fingertip amputation.
AmputationFingertip(s)Parts and materials, unspecified
More severe injuries at Joseph T. Ryerson & Son, Inc.
An employee was using an overhead crane with a sheet lifter to move two stacks of carbon plates. They were standing in-between the two stacks as the sheet lifter lowered onto one of the stacks. The bundled material slipped out and the employee's right ankle was pinned against the other stack, resulting in a fractured leg and ankle that required hospitalization.
An employee was moving 4-inch pieces of solid round material, cradled in a sling. The employee's right middle finger was pinched between two pieces of the material and partially amputated.
A maintenance employee was making adjustments to the measurements on a tube laser. The employee was inside the inter-lock doors when the machine started up. The employee was struck in the torso by the machine arm and suffered ruptured intestines and internal bleeding.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 423510)
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.
An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.
An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.
On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.