Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at The Advance Equipment Manufacturing Company, 4615 West Chicago Avenue, CHICAGO, ILLINOIS 60651
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was setting up a frame and tool handle in an injection molding machine when the machine pressed parts together. The employee's left middle finger was caught between the frame and handle of the tool being manufactured, and the top of the finger was amputated.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 332216)
An employee was positioning a part inside a restrike hammer (full revolution drop hammer). The employee was wearing his safety pullout devices (metal cable with wristlets) at the time. As the employee positioned the part inside the die, he tripped the machine with his palm. As the ram went to drop, his pullout device (cotton rope connection) broke away from the press and his right hand was crushed by the top die as it fell. The employee was hospitalized and required surgery.
An employee was removing the bottom die from an auto hammer. He was pushing the die out with his left hand when the die bar slipped and fell on top of his left index finger, resulting in a fingertip amputation.
An employee was troubleshooting a coolant door fault on a machine when the right door actuated and crushed his right index finger, causing an amputation to the finger.
At about 9:00 a.m. on March 10, 2025, an employee was operating a lathe when a part jammed inside it. The employee was removing the jammed part when the machine's slide shifted, causing the lathe spindle to amputate his left ring fingertip.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.