Other fall to lower level 6 to 10 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Keystone Consolidated Industries, Inc., 7000 SW Adams Street, PEORIA, ILLINOIS 61641
on — Fractures, affecting the heel(s).
Final narrative
On June 29, 2023, an employee was working near the edge of the carrier/woody pit located in the rod mill reform area of the plant. The employee removed banding from around compressed steel. Due to the release of tension, the steel pushed the employee, causing him to fall approximately 8 feet into the pit. The employee was hospitalized with a fractured right heel and required surgery.
HospitalizedHeel(s)Structures and surfaces, unspecified
More severe injuries at Keystone Consolidated Industries, Inc.
An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.
An employee was helping stack scrap wire. A fork truck was setting a carrier of scrap wire on top of another carrier. The scrap wire on the fork truck caught on the second carrier, and the carrier on the forks was pulled off. It struck the employee in the head, causing a concussion. The employee was hospitalized.
On July 7, 2025, at approximately 1:45 AM, an employee was moving vermiculite in a zinc pan with shovel. Molten zinc entered his left boot and caused burns to his shin and the top of his foot.
An employee was setting a floor plate on strand #2 while a rod in strand #1 cobbled at the break-out box and struck the employee's right foot. The employee sustained a puncture to their foot requiring surgery.
An employee was stringing wire around a drawing block at a wire machine. His left hand became caught between the wire and the drawing block, and he suffered an amputation to the ring fingertip.
An employee was preparing a tank car for loading while chipping away solidified product in the manway opening of the tank car. A pressure noise within the tank car startled the employee, causing him to stumble backward and fall approximately 10 feet over the guard railing at the chemical loading rack to the ground. The employee suffered fractured vertebrae, a fractured right wrist and ankle, and a dislocated jaw.
An employee was installing an electrical tray remover from a ladder. As he was descending, his missed a step and fell 6-7 feet to the floor. The employee suffered a head injury.
Two employees were installing spray foam insulation in the attic of a new residential construction. The injured employee fell 8 feet from an A-frame ladder to the floor. The employee suffered lacerations, abrasions, and a head injury.
An employee was on a raised platform attaching wires to electrical boxes. The employee fell approximately 8 feet to the floor below and struck an exit sign on the way down, resulting in an injury to his face.
An employee was in a forklift man basket fixing a garage door opener when they fell approximately 8 feet to the concrete ground below. The employee suffered head and back injuries as well as kidney bruising.
More severe injuries in this industry (NAICS 331222)
An employee was changing a section of pipe on a sulfuric acid tank when the pipe broke and acid splashed onto the left side of the employee's body, resulting in chemical burns to their left shoulder, the back of his arm, and his leg.
On August 1, 2025, at approximately 5:05 AM, an employee was applying a label to a spool of product on a crane when the employee s arm became caught between two points of the crane. The employee was hospitalized with a degloving/avulsion injury to their right arm.
An employee was making an adjustment to a machine when his finger got caught in the machine. He sustained a partial amputation to the fifth finger on his left hand.
An employee was working on a wire drawing machine when three fingers on their right hand were caught between the rolls with the wire intact. The employee sustained an amputation to the middle and ring fingers and was hospitalized.
An employee was working at a threader machine. A spindle caught her sweatshirt. She was pulled into the machine, which pulled off her hooded sweatshirt and pulled in her hair. She suffered a scalping and was hospitalized.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.