OMAHA, NEBRASKA—
Airlite Plastics Company
Direct exposure to electricity, unspecified · First degree electrical burns
At a glance
Federal OSHA recorded a severe workplace injury at Airlite Plastics Company, 6110 Abbott Drive, OMAHA, NEBRASKA 68110 on — First degree electrical burns, affecting the finger(s), fingernail(s), unspecified.
Watch Airlite Plastics Company — free
Get an email when a new federal OSHA severe-injury report for Airlite Plastics Company is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was unplugging a forklift cord from a wall mounted battery charger unit and sustained and electric shock an a first-degree electrical burn to the left ring finger that resulted in a blister.
More severe injuries at Airlite Plastics Company
NAZARETH, PENNSYLVANIA—
Airlite Plastics Company
An employee was removing mold plates from a pallet when the bottom plate fell forward off the pallet and struck her lower left leg, resulting in a fracture that required hospitalization and surgery.
NAZARETH, PENNSYLVANIA—
Airlite Plastics Company
An employee was trying to dislodge jammed plastic in a plastic sheet line; a shear in the machine amputated the tips of his left middle and ring fingers. The machine was guarded with a metal grate at the time of the incident.
OMAHA, NEBRASKA—
Airlite Plastics Company
An employee was removing a ball from the throat on a machine when his right index fingertip was amputated in a pinch point.
View Airlite Plastics Company's full OSHA safety record →
Similar incidents · Same event type
DOTHAN, ALABAMA—
Bob Woodall Air Care Systems, Inc.
An employee was installing a 15-amp breaker in an electrical panel when a 12-gauge ground wire touched the positive busbar of the panel, resulting in an arc flash. The employee sustained a second-degree burn to their left hand.
KENNEDY SPACE CENTER, FLORIDA—
Amentum Spaceport LLC
An employee was repairing an HVAC system in the drop tile ceiling of a conference room when they were shocked, causing them to fall from the ladder. The employee sustained burns to their right middle and ring fingers.
NEWELL, WEST VIRGINIA—
Marsh Bellofram Corporation
An employee was replacing a contactor inside an electrical panel attached directly to a press. The press itself was receiving power from another main panel. After replacing the contactor, the employee flipped the switch and an arc flash occurred, burning the employee's elbow, bicep, and neck.
JACKSONVILLE, FLORIDA—
Heart Utilities of Jacksonville, Inc.
An employee was attempting to switch a medium-voltage primary cable and install a 200-amp fuse barrel. The employee contacted the bottom of the switch gear cradle for the fuse barrel, causing an arc blast. The electricity entered the employee s left hand and exited his big toes, resulting in electric shock and burns to the left hand, arm, shoulder, and both feet. The employee was hospitalized.
CARRABELLE, FLORIDA—
Duke Energy Florida, LLC
On December 6, 2023, an employee of Duke Energy was working on a single-phase 120-/240-volt parallel service re-tap when a secondary flash occurred in an underground service. The employee suffered a second-degree burn to the face and was hospitalized.
More severe injuries in this industry (NAICS 326199)
CENTERVILLE, OHIO—
DimcoGray Corporation
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
MILLTOWN, WISCONSIN—
Greatmats.com Corporation
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
MINERAL WELLS, TEXAS—
Shumard Corporation
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
TIFFIN, OHIO—
Toledo Molding & Die, Inc.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
SPRINGFIELD, NEW JERSEY—
United Window & Door Manufacturing, Inc.
An employee was cutting material on a straight saw when the blade lacerated her right index finger. The employee was hospitalized.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.