105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

United States Steel Corporation

Contact with hot objects or substances · Thermal burns degree unspecified

Federal OSHA recorded a severe workplace injury at United States Steel Corporation, 400 STATE STREET, CLAIRTON, PENNSYLVANIA 15025 on — Thermal burns degree unspecified, affecting the Abdomen unspecified.

An employee was cleaning a coke oven standpipe when a spark contacted his shirt, resulting in burns to his stomach.

Hospitalized Abdomen unspecified Raw and semi-finished materials and byproducts unspecified

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

United States Steel Corporation

An employee was working on the blast furnace during his shift. After his shift, he began experiencing cramping and was hospitalized for dehydration.

United States Steel Corporation

An employee was working with a mixer. The employee fell through a floor hole to a platform 20 feet below the mixer, suffering a fractured pelvis and fractured vertebrae. The employee was hospitalized.

United States Steel Corporation

An employee was completing a roll change. As he reached out to stop the movement of a roll chock coming down the incline, his left hand was pinched between two roll chocks. His index finger was amputated.

United States Steel Corporation

An employee was walking around a mortar dump box, using a water hose to clean debris out of it. The grating slid out of position and the employee's leg went into the sump water. He suffered second-degree burns to the leg.

View United States Steel Corporation's full OSHA safety record →

Spudrock LLC

An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.

Ajinomoto Health and Nutrition North America Inc.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

APAC-Alabama, Inc.

After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.

Cellar Crew LLC

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

Boise Cascade Wood Products, LLC

An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Priefert Manufacturing

An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.

CF&I Steel L.P.

An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

Tampa Bay Steel, LLC

An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.