BESSEMER, ALABAMA—
U.S. Pipe and Foundry
Struck by rolling, sliding, or shifting objects non-running · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury at U.S. Pipe and Foundry, 2023 St. Louis Avenue, BESSEMER, ALABAMA 35020 on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was rolling a pipe off a transfer car when the pipe rolled back and caught their right little finger between the pipe and the rail, resulting in an amputation to the finger.
More severe injuries at U.S. Pipe and Foundry
BESSEMER, ALABAMA—
U.S. PIPE AND FOUNDRY
An employee was rolling two 1,00-pound iron pipes by hand when one of the pipes rolled back toward him, causing his right arm to become caught between the two pipes. He sustained a right radius fracture and was hospitalized for surgery.
BESSEMER, ALABAMA—
U.S. PIPE AND FOUNDRY
A maintenance employee was taking a master link out of a chain when his hand got caught between the chain and sprocket resulting in fractures to the left hand.
BESSEMER, ALABAMA—
U.S. Pipe and Foundry
An employee was helping to clean up an iron spill. A 3-foot skimming rod was laid on top of the machine ladle of a casting machine. The rod had been previously dipped in the blacking liquid. The wet rod fell into the ladle, causing a reaction that ejected molten iron from the ladle. The molten iron contacted and burned the employee's left foot.
View U.S. Pipe and Foundry's full OSHA safety record →
Similar incidents · Same event type
CORSICANA, TEXAS—
Greenbrier Rail Services
An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.
LAKE CITY, FLORIDA—
New Millennium Building Systems
An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
FORT WORTH, TEXAS—
Renegade Group LLC
Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.