Alpha Foundations

On October 29, 2020, an employee was installing two helical piers when his right index finger got caught in the connecting point of the two piers resulting in an amputation injury up to the first knuckle.

An employee was brazing copper lines together on a new air conditioning unit close to an access point in a brick wall, The two wires ran horizontally and copper tubing ran vertically. The heat from the brazing heated up the copper tubing. A wire was touching the copper tubing, causing the wire jacket to melt. The wire infused itself to the copper tubing, which energized the copper pipe. The employee was using a wet towel to cool down the copper tubing when he was electrically shocked, resulting in hospitalization.

On August 19, 2025, at approximately 3:30 PM, an employee was performing painting duties on a swing stage (lift) on the exterior of a building. While bringing the lift to the roof to drop off materials, he reached toward the edge of the building and contacted a metal plaque on the roof s edge, that was energized due to a frayed electrical wire. The employee was electrocuted and lost consciousness. The employee was hospitalized.

On July 29, 2025, an employee was troubleshooting and/or changing an emergency power connector on an aircraft. The employee experienced an electrical shock when an exterior electrical source was activated. The employee was hospitalized for electric shock and burns on their lower right arm.

An employee was servicing a circuit board on a portable X-ray unit when a battery cable touched part of the board, causing electrical burns to two fingers on his right hand.

An employee was conducting jail cell window bar taps. They were closing one cell and opening the adjacent cell at the same time and sustained an electrical shock from an energized metal door.

An employee was walking to exit the work area when steel walls fell on them, resulting in fractures.

Employees were working to apply sealant to a customer's leaking foundation. The injured employee was digging out dirt and passing it to another worker. The hole that was being dug collapsed and the injured employee became trapped in dirt/mud from the waist down. The employee sustained a fractured pelvis.

An employee was cutting a tack weld with a grinder when the grinder exploded. The employee sustained lacerations to their right index finger.

An employee was standing on a concrete wall, stripping concrete forms using a pry bar. The employee fell from the wall to the ground 9 feet below, suffering a fractured back and arm.

An employee was welding a beam when they fell 12 feet from a scissor lift to the ground. The employee sustained fractures to their face, thumb, and both wrists.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.