Jack-knifed or overturned, nonroadway · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at WestRock CP, LLC, 1 South Everitt Ave, PANAMA CITY, FLORIDA 32405
on — Cuts, lacerations, affecting the scalp.
Final narrative
An employee was using a clamp truck to load rolls of paper onto railcars. He was wearing his seat belt and hard hat at the time. He was driving in the forward position when he lost control of the vehicle, which fell on its left side. He suffered a 2-inch laceration behind the left side of his ear, requiring hospitalization.
HospitalizedScalpForklift, order picker, platform truck-powered
An employee was quality checking a cutting device on a paper machine. As he went to manually rotate the flat outer surface of the band motor, his right index finger contacted the cutting side of one of the blades, resulting in a fingertip amputation. The machine blades were guarded at the time.
An employee was loading a 9,386-pound paper roll onto a peel station. The paper rolled off the station and the employee was caught between two rolls of paper, resulting in a pelvis fracture.
While conducting maintenance, an employee was feeding wire into a baler machine. As the employee was guiding the wire, the machine started; it broke and lacerated the employee's left arm.
An employee was threading a paper winder. When the paper curled, the employee tried to straighten the paper and contacted the paper slitter, resulting in a partial amputation to their right index fingertip.
Employee 1 was replacing a bucket (480-volt breaker) while Employee 2 was observing from outside the arc flash boundary (36"). Employee 1 completed the work and was closing the door when an arc flash occurred. Employee 2 sustained first degree burns on the forehead and cheek and first and second degree burns to the hand. Employee 2 was hospitalized. Employee 1 was not injured.
An employee was operating a sit-down type of material handling equipment (MHE). They were turning the MHE with the clamp attachment in the air when the MHE fell over onto its right side. The employee's right foot was caught under the battery cover of the MHE. The employee sustained a chemical burn from the battery and a fractured right ankle.
An employee was driving an unloaded forklift outside a building. During a left turn, the forklift drove off the paved area onto an unpaved surface, became unstable, and tipped over. The employee was pinned under the forklift and suffered two broken leg bones and a broken hip.
An employee was trimming tree branches from an aerial lift. As they were maneuvering the aerial bucket lift from inside, the truck drove over soft ground and tipped over. The bucket lift fell to the ground with the employee tied off inside, resulting in rib fractures.
More severe injuries in this industry (NAICS 322121)
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.