Ignition of clothing from controlled heat source · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at James Marine Inc., 209 Fort Jefferson Hill Road, WICKLIFFE, KENTUCKY 42087
on — Heat (thermal) burns, unspecified, affecting the leg(s), unspecified.
Final narrative
An employee was installing a doubler plate on a ballast tank on a boat that was in dry dock. He was stooped down with his back against pipes, welding a vertical patch on the tank about 4 to 5 inches from his right leg, when his pants caught fire. The employee was welding in very tight quarters.
An employee was lying on his right side, using a torch, when sparks from the torch ignited his clothing. He suffered burns to the right side of his torso, chest, and back. He was hospitalized.
An employee was taking a wheel out of the Kort nozzle on a boat. The employee was pulling out the wheel using a crane and a come-a-long when waves hit the bottom of the boat and caused the load to shift and land on him, breaking his left foot/ankle and pinching his left ring finger.
An employee and a coworker were welding on the inboard and outboard sides of a bulkhead. Welding slag became trapped between the sweatshirts of one employee and ignited. The employee suffered first, second, and potentially third degree burns to the right side of the back and right armpit.
An employee was operating a horizontal boring mill when he stepped backwards and tripped over the tracks of the mill. He fell onto the concrete floor and fractured his hip, requiring surgery.
An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.
An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.
An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.
An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.
More severe injuries in this industry (NAICS 336611)
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was preparing to bend a flat bar in a brake press. When the machine was jogged, the stock rotated up and crushed his left middle fingertip against the outer frame of the die. The fingertip was amputated.
An employee was cutting metal with a torch. A piece of metal struck the employee's left foot, causing multiple fractures to metatarsal(s). The employee was hospitalized.
An employee was descending a ladder carrying a bag of trash. He fell, landed on the ground about 10 feet below, and suffered fractures to his right hip and pelvis.
A mail carrier was delivering mail when aggressive dogs approached. The dog's owner tried to restrain the dogs but one dog broke loose and the mail carrier pepper sprayed that dog. The dog's owner then pushed the mail carrier and he fell on the pavement and injured his neck. The mail carrier was hospitalized.
An employee was installing a fall protection system on a flat roof when they tripped and became entangled in the warning line. They fell approximately 30 feet to the ground below. The employee sustained fractures.
An employee was outside assembling a 500-ton crane. The employee was connecting the rigging to the boom. He leaned forward to attach the lifting plate on the side of the boom and lost balance while bending over. He fell to the ground approximately 10 feet below, landing on his elbow. The employee was hospitalized with a fractured elbow that required surgery.
An employee was using a winch to secure a barge to a dock. The cable of an adjoining winch snapped and struck his left side, causing blunt force trauma and internal injuries to his abdomen.