TULSA, OKLAHOMA—
FasCast Inc.
Ignition of clothing from controlled heat source · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at FasCast Inc., 6107 W. 71st South Ave., TULSA, OKLAHOMA 74131 on — Heat (thermal) burns, unspecified, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee came inside to warm himself next to a lit ladle (a drying process in an open flame pit), causing his shirt to catch fire. The employee sustained burns to his back.
More severe injuries at FasCast Inc.
TULSA, OKLAHOMA—
FasCast Inc.
A temporary employee was cutting a pipe with a saw. The saw blade bound up, kicked back, and hit the employee's foot just behind the steel toe, cutting the big toe at the joint and severing a tendon. He was hospitalized.
TULSA, OKLAHOMA—
FasCast Inc.
An employee was grinding down a casting when the grinding wheel exploded, striking and cutting his left leg. He fell backward and broke his tibia in two places. He was hospitalized, undergoing surgery.
TULSA, OKLAHOMA—
FASCAST, INC.
An employee was standing on the rail of the mega mixer. The employee was crossing over the rails and slipped. The employee's right foot was struck by the mega mixer and pinned between the wheel and rail.
View FasCast Inc.'s full OSHA safety record →
Similar incidents · Same event type
FAIRLESS HILLS, PENNSYLVANIA—
Falls Manufacturing Company/a U-Haul Co.
An employee was welding metal parts. The employee turned to the left and their work uniform came in contact with the location on the part that had just been welded. The employee's uniform ignited, causing burns to their shoulder and back.
CORDELE, GEORGIA—
Flint Ag & Turf
An employee was using a small propane heater when they sustained third-degree burns to the left buttock and second-degree burns to the back and neck.
WAYNESBORO, PENNSYLVANIA—
Novae, LLC.
An employee was welding steel dump ramp slides. He leaned over and a previous weld caught his hoodie on fire. The employee sustained burns on his left side from the armpit to the waistline.
LEWISBURG, PENNSYLVANIA—
Pik Rite Inc.
An employee was using a fiber wheel to cut a 55-gallon drum to make a trash can. As they were cutting, sparks flew into the barrel and fire came out of a hole on the barrel, catching the employee's shirt on fire. The employee sustained burns to their abdomen and chest, requiring hospitalization.
KILLDEER, NORTH DAKOTA—
DC Power Tong, LLC
An employee was removing tubing caps and cleaning tubing ends with solvent. Their flame-resistant pants became soaked with the cleaning solvent and were ignited by a propane torch used for removing tubing caps. The employee was hospitalized with burns to their legs.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.